| 2013 |
Vikram Verma Monica Katiyar |
Effect of the deposition parameters on the structural and magnetic properties of pulsed laser ablated NiO thin films & 527 |
Thin Solid films |
SCI |
| 2013 |
D. Kumar, Aarti Sarin, Vikram Verma and R. Venkatraman |
Pulsed laser deposition assisted fabrication and characterization of Fe–Co nanoparticles embedded in TiN thin film matrix & 534 |
Thin Solid films |
SCI |
| 2015 |
Vikram Verma Monica Katiyar |
Origin of Intrinsic ferromagnetism in undoped antiferromagnetic NiO thin films & 48 |
Journal of Physics D: Applied Physics |
SCi |
| 2019 |
Jarnail Singh, Vikram Verma, Ravi Kumar |
Preparation and Structural, Optical Studies of Al substituted Chromium Oxide (Cr2O3) Nanoparticles & 159 |
Vacuum |
SCI |
| 2019 |
Jarnail Singh, Vikram Verma, Rajesh Kumar and Ravi Kumar |
Influence of Mg2+-substitution on the optical band gap energy of Cr2-xMgxO3 nanoparticles & 13 |
Results in Physics |
SCI |
| 2019 |
Jarnail Singh, Vikram Verma, Rajesh Kumar and Ravi Kumar |
Effect of Structural and
Thermal Disorder on the Optical Band Gap Energy of Cr2O3 Nanoparticles & 6
|
Materials Research Express |
SCI |
| 2019 |
Jarnail Singh, Vikram Verma, Rajesh Kumar and Ravi Kumar |
Structural, Optical and Electrical Characterization of Epitaxial Cr2O3 Thin Film Deposited by PLD & 6 |
Materials Research Express |
SCI |
| 2020 |
Jarnail Singh, Vikram Verma, Rajesh Kumar and Ravi Kumar |
Role of Ni2+ substituent on the structural, optical and magnetic properties of chromium oxide (Cr2-xNixO3)
nanoparticles & 46
|
Ceramics International |
SCI |
| 2020 |
Amarjit Singh, Jarnail Singh, Manoj Kumar Sinha, Ravi Kumar and Vikram Verma |
Investigations on microstructural and microhardness developments in sintered iron–coal fly ash composites & 45 |
Sadhana |
SCI |
| 2020 |
Jarnail Singh, Vikram Verma, Rajesh Kumar and Ravi Kumar, |
Comparative Studies on
Optoelectronic Properties of Epitaxial MgxCr2-xO3 and AlxCr2-xO3 (x = 0, 0.1, 0.2 and 0.3) Thin Films Deposited on Sapphire Substrates & 847
|
Journal of Alloys and Compounds |
SCI |
| 2021 |
Jarnail Singh, Vikram Verma, Rajesh Kumar and Ravi Kumar |
Structural and Optoelectronic Properties of Epitaxial Ni-Substituted Cr2O3 Thin Films for p-type TCO Applications & 123 |
Materials Science in Semiconductor Processing |
SCI |
| 2021 |
Amarjit Singh, Jarnail Singh, Manoj Kumar Sinha, Ravi Kumar and Vikram Verma, |
Compaction and densification characteristics of iron powder/coal fly ash (CFA) mixtures processed by powder metallurgy technique & 30 |
Journal of Materials Engineering and Performance |
SCI |
| 2021 |
Pankaj Bhardwaj, Jarnail Singh, Rajesh Kumar, Ravi Kumar and Vikram Verma, |
Structural, Optical and Magnetic Characterization of Ni2+ ions doped Chromium Oxide (Cr2O3) Nanoparticles &115 |
Solid State Sciences |
SCI |
| 2022 |
Pankaj Bhardwaj, Rajesh Kumar, Jarnail Singh, Vikram Verma, and Ravi Kumar |
Oxygen defects induced tailored optical and magnetic properties of FexCr2−xO3 (0 ≤ x ≤ 0.1) nanoparticles &128 |
Applied Physics A |
SCI |
| 2023 |
Pankaj Bhardwaj, Rajesh Kumar, Vikram Verma, and Ravi Kumar |
A comparative study on the structural, optical, and magnetic behavior of transition metal (Co and Mn) ions substituted Cr2O3 nanoparticles & 565 |
Journal of Magnetism and Magnetic Materials |
SCI |
| 2024 |
Pankaj Bhardwaj, Jarnail Singh , A.P. Singh , R.J. Choudhary, Vikram Verma, Ravi Kumar |
Observation of room temperature ferromagnetism in transition metal ions substituted p-type transparent conducting oxide Cr2O3 thin films & 229 |
Materials Science and Engineering: B |
SCI |
| 2017 |
Raj Bahadur Singh, N.K. Mukhopadhyay, G.V.S. Sastry, and R. Manna |
Recovery of ductility in ultrafine-grained low-carbon steel processed through equal-channel angular pressing followed by cold rolling and flash annealing, V0l 48 issue 3 |
Metallurgical and Material Transactions A |
Yes |
| 2017 |
Raj Bahadur Singh, N.K. Mukhopadhyay, G.V.S. Sastry, and R. Manna |
Development of High-Strength Bulk Ultrafine-Grained Low Carbon Steel Produced by Equal-Channel Angular Pressing, Vol 48A |
Metallurgical and Material Transactions A |
Yes |
| 2019 |
Raj Bahadur Singh, Deepa Verma, N.K. Mukhopadhyay, G.V.S. Sastry, and R. Manna |
Development of texture in ultrafine-grained low carbon steel processed through equal channel angular pressing, Vol . 28 |
Materials Engineering and Performance |
Yes |
| 2019 |
Sanjeev Kumar and Raj Bahadur Singh |
Corrosion behavior of newly developed heat treated 10Mn-2Ni-3.5Cr-1.5Cu alloy. Vol. 6 |
Materials Research Express |
Yes |
| 2018 |
Raj Bahadur Singh, N.K. Mukhopadhyay, G.V.S. Sastry, and R. Manna |
Effect of flash annealing on ultrafine-grained low carbon steel processed through equal-channel angular pressing followed by cryo rolling. |
Springer Nature Singapore Pte Ltd |
Yes |
| 2020 |
Raj Bahadur Singh, N.K. Mukhopadhyay, G.V.S. Sastry, and R. Manna |
Development of Single Phase Bimodal Microstructure in Bulk Ultrafine-Grained Low Carbon Steel (Published online) https://doi.org/10.1016/j.matpr.2020.02.312 |
Materials Today Proceedings |
Yes |
| 2021 |
Sandeep Bhoi, Raj Bahadur Singh, A. P. Harsha & R. Manna |
Effect of Grain Refinement on Tribological Study of Low Carbon Steel, https://doi.org/10.1007/s12666-021-02242-5 |
Transactions of IIM |
Yes |
| 2021 |
Khemraj Sahu, Raj Bahadur Singh |
Development of Fine-Grained Complex A356 Aluminum Alloy
through Converging Die Compression.
https://doi.org/10.1007/s12666-021-02276-9 |
Transactions of IIM |
Yes |
| 2021 |
Khemraj Sahu, Dhiraj Narayane, Manvandra Kumar Singh, Raj Bahadur Singh, Ashish Srivastava |
Microstructural analysis of forged Al-11Si-2.5Cu-0.6Fe alloy at different
processing conditions, https://doi.org/10.1016/j.matpr.2021.05.113 |
Materials Today Proceedings |
Yes |
| 2023 |
Raj Bahadur Singh, Sanjeev Kumar, and Khemraj Sahu |
Development of Graphitic 2024 Al Alloy by Mechanical Alloying, vol. 962, |
Key Engineering Materials |
Yes |
| 2022 |
Sunil Kumar, Vinay Kumar, Raman Devi, Avnish Kumar Sisodia, Anushree Jatrana, Raj Bahadur Singh, Rita Dahiya, Ajay Kumar Mishra |
Sustainable and Scalable Approach for Enhancing the Electrochemical Performance of Molybdenum Disulfide (MoS2), Vol. 2022 |
Advances in Materials Science and Engineering |
Yes |
| 2024 |
Sunil Kumar, Vinay Kumar, Mamta Bulla, Raman Devi, Rita Dahiya, Avnish Kumar Sisodiya, Raj Bahadur Singh, Ajay Kumar Mishra |
Hydrothermally reduced graphene oxide based electrodes for high-performance symmetric supercapacitor |
Materials Letters |
Yes |
| 2015 |
P. Trivedi, A. K. Patel, R. Maurya, R. Jayaganthan, K. Balani |
Nanomechanical Characterization and Protein Adsorption of Cold Rolled Zirconium Alloy |
Journal of Minerals, Metals, and Materials |
Yes |
| 2016 |
R. Maurya, B. Kumar, S. Ariharan, J. Ramkumar, K. Balani |
Effect of Carbonaceous Reinforcements on the Mechanical and Tribological Properties of Friction Stir Processed Al6061 Alloy |
Materials & Design |
Yes |
| 2016 |
R. Maurya, A. Gupta, S. Omar, K. Balani |
Effect of Sintering on Mechanical Properties of Ceria Reinforced Yttria Stabilized Zirconia |
Ceramics International |
Yes |
| 2017 |
S. Awasthi, R. Maurya, C. P. Pandey, K. Balani |
Interfacial Mechanics of Carbonaceous Reinforcements in Electrophoretically Deposited Nickel Coatings |
Surface and Coatings Technology |
Yes |
| 2017 |
A. R. Siddiqui, R. Maurya, K. Balani |
Superhydrophobic Self-floating Carbon Nanofiber Coating for Efficient Gravity-directed Oil/Water Separation |
Journal of Materials Chemistry A |
Yes |
| 2017 |
R. Maurya, A. R. Siddiqui, K. Balani |
In vitro Degradation and Biomineralization Ability of Hydroxyapatite Coated Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn Alloys |
Surface and Coatings Technology |
Yes |
| 2017 |
P. K. Singh, A. L. Kumar, P. K. Katiyar, R. Maurya, |
Agglomeration Behavior of Steel Plants Solid Waste and its Effect on Sintering Performance |
Journal of Materials Research and Technology |
Yes |
| 2018 |
A. Pandey, S. Midha, R. K. Sharma, R. Maurya, |
Antioxidant and Antibacterial Hydroxyapatite-based Biocomposite for Orthopedic Applications |
Materials Science & Engineering: C |
Yes |
| 2018 |
R. Maurya, A. R. Siddiqui, K. Balani |
An Environment-Friendly Phosphate Chemical Conversion Coating on Novel Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn Alloys with Remarkable Corrosion Protection |
Applied Surface Science, |
Yes |
| 2019 |
R. Maurya, A. R. Siddiqui, P. K. Katiyar, K. Balani |
Mechanical, Tribological and Anti-corrosive Properties of Polyaniline/Graphene Coated Mg-9Li-7Al-1Sn and Mg-9Li-5Al-3Sn-1Zn Alloys |
Journal of Materials Science and Technology |
Yes |
| 2020 |
R. Maurya, D. Mittal, K. Balani, |
Effect of heat-treatment on microstructure, mechanical and tribological properties of Mg-Li-Al based alloy |
Journal of Materials Research and Technology |
Yes |
| 2020 |
S. Ariharan, R. Maurya, R. K. Sharma, V. K. Sharma, S. Lohia, K. Balani |
Damage mechanics of polypropylene-based composites using progressive-and constant-load scratching |
Polymer Composites |
Yes |
| 2020 |
A. R. Siddiqui, R. Maurya, P. K. Katiyar, K. Balani |
Superhydrophobic, self-cleaning carbon nanofiber CVD coating for corrosion
protection of AISI 1020 steel and AZ31 magnesium alloys |
Surface and Coatings Technology |
Yes |
| 2021 |
S. Ariharan, R. Maurya |
Assessment of plasma sprayed carbon nanotube reinforced Al2O3-based nanocomposite with micro-scratching |
Surface and Coatings Technology |
Yes |
| 2021 |
P. K. Katiyar, R. Maurya, P.K. Singh |
Failure Behavior of Cemented Tungsten Carbide Materials: A Case Study of Mining Drill Bits |
Journal of Materials Engineering and Performance |
Yes |
| 2022 |
P. Priyadarshi, P.K. Katiyar, R. Maurya |
A review on mechanical, tribological and electrochemical performance of ceramic particle-reinforced Ni-based electrodeposited composite coatings |
J Mater Sci |
Yes |
| 2022 |
R. Maurya, S. Panwar, K. Balani |
Heat-Treatment Design of LATZ9531 Alloy and Ensuing Structure–Properties Correlation |
Journal of Materials Engineering and Performance, |
Yes |
| 2023 |
D. Mishra, R. Maurya, V. Verma, K. Balani, K.V. M. Krishna, D. Srivastava, GN Ganesha, U. Singha, A. Mukhopadhyay |
Understanding the influence of graphene-based lubricant/coating during fretting wear of zircaloy |
Wear |
Yes |
| 2022 |
P. Priyadarshi, K.Kishore, R. Maurya |
Electrodeposited Ni on copper substrate: an experimental and simulation comparative study. |
Interact Des Manuf, |
Yes |
| 2022 |
P.K. Katiyar, R. Maurya, P.K. Singh |
Highlighting the corrosion mechanisms of corroded plain carbon steels using the atomic force microscopy”, |
International Journal of Sustainable Building Technology & Urban Development |
Yes |
| 2022 |
P.K. Katiyar, R. Maurya, P.K. Singh |
Corrosion behavior of plain carbon steel under different heat treatment conditions in freely aerated 35% NaCl solution |
International Journal of Sustainable Building Technology & Urban Development, |
Yes |
| 2022 |
P. Priyadarshi, A.Yadav, R. Maurya, |
Deposition of Cu-based composite coatings on mild steel substrate via electrodeposition method”, |
Materials Today: Proceedings, |
Yes |
| 1995 |
V. Singh, A. N. Tiwari and A. R. Kulkarni |
Electrical behaviour of attritor processed Al/PMMA composites, 41(3):310-313 |
Materials Science and Engineering B |
Scopus/SCI |
| 2003 |
V. Singh, A. R. Kulkarni and T. R. Rama Mohan |
Dielectric Properties of Aluminum - Epoxy Composites, 90(13):3602 - 3608 |
Journal of Applied Polymer Science |
Scopus/SCI |
| 2016 |
S. Katoch, R. Sehgal and V. Singh |
Effect of cryogenic treatment on the tribological behaviour of H11 hot die steel dry sliding against D3 steel, 10(4):185-195 |
Tribology- Materials, Surfaces & Interfaces |
Scopus/Web of Science |
| 2017 |
S. Katoch, R. Sehgal and V. Singh |
Evolution of mechanical properties and microstructure of differently cryogenically treated hot die steel AISI–H13, 108(3):173-184 |
International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) |
Scopus/Web of Science |
| 2017 |
S. Katoch, R. Sehgal and V. Singh |
Optimization of friction and wear characteristics of varied cryogenically treated hot die steel grade AISI-H13 under dry condition, 5(1): 66–86 |
Friction |
Scopus |
| 2018 |
S. Katoch, R. Sehgal and V. Singh |
Wear behavior of differently cryogenically treated AISI H13 steel against cold work steel, |
Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering |
SCI |
| 2018 |
P. Chand, V. Bansal, S. Khera and V. Singh |
Effect of pH values on structural, optical, electrical and electrochemical properties of spinel LiMn2O4 cathode materials, 4(2) |
Materials Science and Engineering B |
Scopus/SCI |
| 2016 |
S. Katoch, V. Singh and R. Sehgal |
Characterisation of microstructure and mechanical properties of differently cryogenically treated hot die steel AISI-H11, 7(3/4):285 |
International Journal of Materials Engineering Innovation |
Scopus |
| 2019 |
S. Katoch, V. Singh and R. Sehgal |
Mechanical Properties and Microstructure Evaluation of Differently Cryogenically Treated AISI-H11 Steel, 19(5):1381-1392 |
International journal of steel structures |
Scopus |
| 2019 |
S. Saralch, V. Jagota, D. Pathak and V. Singh |
Response surface methodology based analysis of the impact of nanoclay addition on the wear resistance of polypropylene, 86(1):10401 |
The European Physical Journal Applied Physics |
Scopus/Web of Science |
| 2019 |
S. Khera, P. Chand and V. Singh |
Enhanced Visible-Light Photocatalytic Activity of Samarium -Doped Zinc Oxide Nanostructures |
Journal of Rare Earths |
Scopus/SCI |
| 2019 |
P. Kumar, P. Chand, A. Joshi, V. Luxmi and V. Singh |
Rare earth substituted Bi0.84RE0.16FeO3 (RE = La, Gd) - an efficient multiferroic photo-catalyst under visible light irradiation |
International Journal of Hydrogen Energy |
Scopus/Web of Science |
| 2019 |
S. Katoch, R. Sehgal, V. Singh, M. Gupta, M. Mia and C. Pruncu |
Improvement of Tribological Behavior of H-13 Steel by Optimizing the Cryogenic-Treatment Process Using Evolutionary Algorithms |
Tribology International |
Scopus/SCI |
| 2019 |
P. Chand, V. Bansal, S. Khera and V. Singh |
Effect of pH values on structural, optical, electrical and electrochemical properties of spinel LiMn2O4 cathode materials, 4(2) |
Journal of Science: Advanced Materials and Devices |
Scopus/Web of Science |
| 2020 |
A. Joshi, P. Chand and V. Singh |
Electrochemical and optical study of BiPO4 nanostructures for energy storage applications |
Materials today: proceedings |
Scopus |
| 2020 |
P. Chand, S. Kumar, V. Singh and N. P. Singh |
Investigation of the structural and electrical behavior of LiFePO4 as cathode material for energy storage application |
Materials today: proceedings |
Scopus |
| 2020 |
A. Joshi, P. Chand and V. Singh |
Optical and electrochemical performance of hydrothermal synthesis of BiPO4 nanostructures for supercapacitor applications |
Materials today: proceedings |
Scopus |
| 2020 |
S. Kumar, P. Chand, A. Joshi and V. Singh |
Modeling of electrical behavior of LiFePO4 cathode materials for lithium ion batteries |
Materials today: proceedings |
Scopus |
| 2020 |
S. Khera, P. Chand, V. Singh and D. Kumar |
Rapid visible light-driven photocatalytic degradation using Ce-doped ZnO nanocatalysts, 178:109364 |
Vacuum |
Scopus/SCI |
| 2020 |
P. Kumar, P. Chand and V. Singh |
La3+ substituted BiFeO3-a proficient nano ferrite photo-catalyst under the application of visible light, 754:137715 |
Chemical Physics Letters |
Scopus/SCI |
| 2020 |
A. Kaushal and V. Singh |
Melt-Processed Graphite-Polypropylene Composites for EMI Shielding Applications |
Journal of Electronic Materials |
Scopus/SCI |
| 2020 |
A. Kaushal and V. Singh |
Development of lightweight polypropylene/carbon fiber composites for its application in shielding of electromagnetic interference in X-band |
Journal of Materials Science Materials in Electronics |
Scopus |
| 2020 |
L. Singh and V. Singh |
Synthesis of Ag@PANI nanocomposites by complexation method and their application as label-free chemo-probe for detection of mercury ions |
Journal of Polymer Engineering |
Scopus |
| 2020 |
P. Chand, A. Joshi and V. Singh |
Impact of phase segregation on optical and electrochemical property of BiPO4 nanostructures for energy storage applications |
Journal of Materials Science Materials in Electronics |
Scopus |
| 2020 |
L. Singh and V. Singh |
Study of structural and functional properties of fluorescent EDTA@CQDs synthesized from peanut shells via pyrolysis technique |
Materials today: proceedings |
Scopus |
| 2020 |
L. Singh and V. Singh |
Synthesis of Au@PANI nanocomposites by complexation method and their application as label-free chemo probe for detection of mercury ions |
Bulletin of Materials Science |
Scopus |
| 2020 |
A. Kaushal and V. Singh |
Electromagnetic interference shielding response of multiwall carbon nanotube/polypropylene nanocomposites prepared via melt processing technique |
Polymer Composites |
SCI |
| 2020 |
A. Kaushal and V. Singh |
Effect of filler loading on the shielding of electromagnetic interference of reduced graphene oxide reinforced polypropylene nanocomposites prepared via a twin-screw extruder |
Journal of Materials Science: Materials in Electronics |
SCI |
| 2021 |
P. Chand, A. Joshi and V. Singh |
High performance of facile microwave-assisted BiPO4 nanostructures as electrode material for energy storage applications |
Materials Science in Semiconductor Processing |
Scopus |
| 2021 |
S. Saini, P. Chand, A. Joshi, S. Lal and V. Singh |
Effect of Hydrothermal Temperature on Structural, Optical and Electrochemical Properties of α-MnO2 Nanostructures for Supercapacitor Application |
Chemical Physics Letters |
Scopus |
| 2021 |
A. Kaushal and V. Singh |
Analysis of mechanical, thermal, electrical and EMI shielding properties of graphite/carbon fiber reinforced polypropylene composites prepared via a twin screw extruder |
Journal of Applied Polymer Science |
SCI |
| 2022 |
P. Sharma, K. Kishore, M. K. Sinha, and V. Singh |
Electrical discharge machining of nickel-based superalloys |
International Journal of Materials Engineering Innovation |
Scopus |
| 2022 |
L. Singh, P. K. Singh and V. Singh |
Synthesis and characterization of carbon nanotube reinforced hydroxyapatate ceramics proposed for biomedical applications |
Materials Today: Proceedings |
Scopus |
| 2022 |
A. Kaushal and V. Singh |
Excellent electromagnetic interference shielding performance of polypropylene/carbon fiber/multiwalled carbon nanotube nanocomposites |
Polymer Composites |
SCI |
| 2022 |
L. Singh and V. Singh |
CQDs/PANI nanocomposites based sensing probe for the sensitive and selective detection of mercury ions via Raman spectroscopy |
Applied Physics A |
SCI |
| 2022 |
M. K. Sharma, M. Sharma and V. Singh |
Structural and Optical Properties of Ce1-xGdxO2 Nanoparticles |
Materials Today: Proceedings |
Scopus |
| 2023 |
P. Sharma, K. Kishore, V. Singh and M. K. Sinha |
Optimization of Process Parameters for Better Surface Morphology of Electrical Discharge Machining-Processed Inconel 825 Using Hybrid Response Surface Methodology-Desirability Function and Multi-objective Genetic Algorithm Approaches |
Journal of Materials Engineering and Performance |
SCIE |
| 2023 |
P. Sharma, V. Singh and M. K. Sinha |
Surface Morphology Investigations during Multi-walled Carbon Nanotubes and Nanographene Mixed Electrical Discharge Machining of Inconel 825 |
Journal of Materials Engineering and Performance |
SCIE |
| 2023 |
A. Paul, V. Singh et al |
Mechanical and Tribological Properties of Nano Clay/PMMA Composites Extruded with a Twin-Screw Extruder |
Proceedings of the Institution of Mechanical Engineers: Part E Journal of Process Mechanical Engineering |
Scopus |
| 2024 |
P. Sharma, K. Kishore, V. Singh and M. K. Sinha |
Surface Morphology Analysis of Inconel 625 through Multi-walled Carbon Nanotubes-Based Electric Discharge Machining |
Journal of Materials Engineering and Performance |
SCIE |
